A bridal buyer in Berlin told us the engagement ring sold well, but the matching wedding band returned three times: it sat flush at the jeweller's bench and left a 1.2 mm gap against the ring on the finger. The engagement ring sat 1.8 mm off the finger; the wedding band was a straight flat band built to a zero gap on the bench. Fingers are not flat. The band needed a contour.
Matching a custom moissanite wedding band to an engagement ring is a measurement problem, not a design preference. Below are the three band profiles we build, the gap rules we hold to, and the measurements we need from the buyer before CAD opens. We reference the wedding ring profile overview on Wikipedia only for vocabulary; the gap numbers below are our own production tolerances.
Three band profiles: flush, contour and notched
A flush band is a straight flat band that sits against a flat-shanked engagement ring. It works only when the engagement ring has no cathedral, no raised head and a flat inner wall. A contour band is carved to match the curve of the engagement ring's shoulder; it follows the head down to the finger and closes the gap on high-set rings. A notched band is cut away to clear a specific feature (a halo, a bulge, a hidden setting). Most bridal orders we see need a contour, not a flush band. Our his and hers matching set guide covers the pair-build economics.
The gap rule: 0.2 mm bench, zero on the finger
We build the band with a 0.2 mm intentional gap on the bench, so that when the ring is worn and the engagement ring settles against the finger, the two bands touch. Build to zero on the bench and the band rocks; build to 0.5 mm and there is a visible gap on the finger. The 0.2 mm bench gap is the number we confirm on the render stage, because the render cannot show the finger flexion.
Matching metal, finish and milgrain
A matching band should share the alloy, karat and finish of the engagement ring. Mixing 14K white gold with 18K yellow gold reads intentional only on a fashion set; on a bridal set it reads as a mistake. Finish matching matters too: a high-polish engagement ring paired with a matte wedding band looks unfinished. Milgrain edges should match in bead size (we use 0.45 mm beads on both pieces). Our QC checklist logs the alloy, finish and milgrain on both rings before they ship together.
Men's bands and the width conversation
Bridal pairs often pair a 2.5 mm women's band with a 6 mm men's band. The widths do not need to match; the metal and finish should. We build men's bands in the same alloy, same rhodium (white gold) and same polish. Buyers who want the pair to read as one set often choose a shared texture (hammered, brushed) across both widths. Our men's band width guide lists the profile options.
Stone sharing: shared prongs and shared gallery
For three-stone or halo sets, some buyers ask the wedding band to share prongs with the engagement ring. We advise against it: shared prongs mean the two rings cannot be resized independently, and one damaged prong takes both rings out of service. We build separate rings with aligned stone rows instead, so the two bands sit side by side and read as a set without mechanical dependence.
Pricing the pair: what buyers should quote
A matched pair costs about 1.6 times the price of a single engagement ring, because the wedding band is built to a measured contour rather than a stock template. The extra 0.6x covers the contour measurement, the paired render and the QC step where both rings are stacked on the mandrel. Buyers who try to sell a stock band alongside a custom engagement ring get the 1.2 mm gap returns described above. Our couple matching overview lists the same pair-build pricing.
How do I measure the gap on the engagement ring?
We ask buyers to send a profile photo of the engagement ring worn on a finger, plus the shank width and head height off the finger. We reverse-engineer the contour from the photo and the numbers, then render both rings together.
Can you match a wedding band to a ring I bought elsewhere?
Yes. We build to the measured ring. The buyer sends the existing ring for casting copy, or sends detailed measurements and a 360-degree video. We recommend sending the physical ring for the first match.
Do both rings ship together or separately?
Together, as one set. We hold the wedding band until the engagement ring passes QC so the pair ships in the same box, with the alloy and finish matched on the same bench.
What if the engagement ring is resized later?
A contour band is cut to the original size. If the engagement ring is resized by more than half a size, the band may need recutting. We flag this on the proforma so buyers advise their customers before purchase.
Send us the engagement ring measurements, the reference photo and the band width you want. We return a contour or flush recommendation and a paired render within seven working days. Request your matched moissanite bridal set render today.
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.
