The Sample Approval That Survives Production in the Private Label Carton Program
A US buyer of trendy Earrings sent us a competitor's trendy Earring in March with one question: why does this fail at prong geometry after a season. We measured it, rebuilt the spec around stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, and shipped 200 trendy Earrings that cleared inspection with zero rejects, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
That rejection was avoidable at the drawing stage. Prong geometry belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, on a 200-piece Private Label Carton order at USD 45-252.
We kept the Private Label Carton price and changed the four measurements that matter. The rebuild cost about 22 seconds per piece and removed the whole claim conversation, and at USD 45-252 for 200 pieces that is the number the buyer signs.
Four Spec Lines a Private Label Carton Buyer Checks
The Private Label Carton buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, on a 200-piece Private Label Carton order at USD 45-252.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
None of the four adds cost at USD 45-252. They add about 22 seconds per piece and remove the reason to inspect twice.
Private Label Packaging for trendy Earrings
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin trendy Earring. Below 0.8 mm of shank width we recommend the hangtag only, and the Private Label Carton quote for it sits at USD 45-252.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, the figure being USD 45-252 for a 200-piece run.
Cost Split on a Private Label Carton Piece at USD 45-252
At USD 45-252 per piece for trendy Earrings, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for trendy Earrings | 32% | Alloy choice and casting yield |
| Stone or melee for trendy Earrings | 23% | Sieve range and lot batching |
| Setting and finishing labor for trendy Earrings | 21% | Jig design and bench minutes |
| Plating, polish and QC for trendy Earrings | 14% | Per-tray versus per-piece checks |
| Packaging for trendy Earrings | 10% | private-label carton with hangtag |
The saving in the cheapest quote hides in plating and stone grade. At 200 pieces that saving is visible in season two, priced at USD 45-252 for the 200-piece Private Label Carton run.
Three Failures That Reach the Private Label Carton Bench
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, which is USD 45-252 on the Private Label Carton schedule.
In a 200-piece run this typically shows on 14 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, which is how the Private Label Carton account reads it at USD 45-252.
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, and the Private Label Carton quote for it sits at USD 45-252.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Terms Behind a Private Label Carton Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with GRA report and private-label carton with hangtag stated on the same sheet.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 45-252 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified GRA report and packed private-label carton with hangtag at 200 pieces.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 45-252 for 200 pieces that is the number the buyer signs.
The Reject Tray Policy That Decides a Partnership
The answer for trendy Earrings depends on four variables, and three of them are under the buyer's control, certified GRA report and packed private-label carton with hangtag at 200 pieces.
The commercial version of this question for trendy Earrings is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, on a 200-piece Private Label Carton order at USD 45-252.
That clause matters more than a discount on trendy Earrings. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, which is how the Private Label Carton account reads it at USD 45-252.
What the Quote Actually Covers
In the American bridal market, this is the single most negotiated line on trendy Earrings and the least documented one, the figure being USD 45-252 for a 200-piece run.
We run this check per tray rather than per carton because the defect that matters on trendy Earrings is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 45-252.
The report the buyer receives states the count per tray, the measured average and the outlier count for trendy Earrings. It is deliberately unglamorous, and it is the document that settles most disputes before they start, and the Private Label Carton quote for it sits at USD 45-252.
The Calendar Behind a Private Label Carton Run
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on trendy Earrings at USD 45-252.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, quoted at USD 45-252 per piece in private-label carton with hangtag.
The First Private Label Carton Order
Start with three designs at 50 pieces each. That covers the 200 pieces you need to read sell-through without betting on one model, quoted at USD 45-252 per piece in private-label carton with hangtag.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 200 pieces inside that window. The calendar is the same on every Private Label Carton run, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
Getting private-label carton with hangtag to the American bridal market
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the American bridal market, certified GRA report and packed private-label carton with hangtag at 200 pieces, which the Private Label Carton file records at USD 45-252 in private-label carton with hangtag.
FOB is the default and DDP is the option. Buyers new to the American bridal market usually take DDP once and then switch after they see the breakdown, the figure being USD 45-252 for a 200-piece run.
At receiving, count cartons, weigh one tray and measure ten pieces against stone retention after a 40-cycle wear test. Twenty minutes here saves a season of returns, shipped as private-label carton with hangtag and certified GRA report, and the Private Label Carton quote for it sits at USD 45-252.
Frequently Asked Questions
What is the minimum order for trendy Earrings?
50 pieces per trendy Earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 45-252 per piece in private-label carton with hangtag.
Do you supply certificates for trendy Earrings?
GRA report on trendy Earrings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, and the Private Label Carton quote for it sits at USD 45-252.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, on a 200-piece Private Label Carton order at USD 45-252.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, on a 200-piece Private Label Carton order at USD 45-252.
What is the minimum order for trendy Earrings?
50 pieces per trendy Earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 45-252 per piece in private-label carton with hangtag.
Next Step
If the USD 45-252 band fits the shelf, send a drawing and we quote the 200-piece Private Label Carton run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across trendy Earrings and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, priced at USD 45-252 for the 200-piece Private Label Carton run.
Related reading: Trendy Earrings Vermeil Upgrade: How the Second Order Becomes Cheaper - HOLYCOME Silver Bracelets Valentine Program: Alloy, Karat and the Cost of a Color Change - HOLYCOME
