Care advice for Trendy Earrings is usually written for the customer. This one is written for the seller, because the care card you print decides the return conversation six months later.
The daily routine
Put Trendy Earrings on last and take it off first. That single rule removes most contact with perfume, hair product and cleaning agents, which are the three causes of plating and stone discolouration.
Wipe with a dry soft cloth after wear. Do not polish plated goods with a rouge cloth; it removes microns.
Keep the CAD file and the mould receipt. Ownership is a document, not an understanding.
Storage that prevents scratches
Store separately in a pouch or a compartment, with the piece closed. Chains go flat, rings go in a slot, earrings go in pairs.
On Trendy Earrings, scratches come from other jewelry more often than from daily wear.
| Risk | Cause | Prevention |
|---|---|---|
| Tarnish | Humidity, sulfur | Dry storage, e-coat |
| Plate wear | Friction, chemicals | 0.8+ micron, wipe after wear |
| Scratches | Contact with other pieces | Separate storage |
| Stone dullness | Soap and lotion film | Warm water, soft brush |
| Clasp failure | Repeated strain | Clasp check at sale |
Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.
Photograph the first article before the batch runs. A shifted seat or a short prong is cheapest to fix at one piece.
What to avoid, specifically
Chlorine, hot tubs, household cleaners with ammonia, and ultrasonic cleaners on plated or treated stones. Ultrasonic is fine on plain metal, not on a plated piece.
An ultrasonic cycle on a thin plate can lift the finish at the prong tips in one pass.
The care card that reduces returns
Four lines: put on last, wipe after wear, store separately, avoid chlorine. Then one line on replating: what the service costs and how long it takes.
A care card with a replating path turns a complaint into a service. On Trendy Earrings, that is the cheapest retention tool you have.
A supplier who will name the mill, the stone source and the plating shop is a supplier you can audit. A supplier who will not is a price with no chain behind it.
What to check before the order
Run the five checks below in order. The first two protect the money, the last three protect the launch date.
- Put jewelry on last, take it off first.
- Wipe with a dry cloth after wear.
- Store each piece separately.
- Avoid chlorine and ammonia.
- Print a replating path on the care card.
If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.
Frequently Asked Questions
How should Trendy Earrings be cleaned?
Warm water with a drop of mild soap and a soft brush, then dry with a cloth. No ultrasonic on plated or treated pieces.
Why does plating wear at the shank?
It is the contact point. Thickness and a dry wipe after wear are the two controls.
Can I use a silver polishing cloth?
On unplated sterling, yes. On plated goods, no; it removes the plate.
How should jewelry be stored?
Separately, closed, dry. A pouch per piece prevents both scratches and tarnish.
Should the care card mention replating?
Yes, with a cost and a turnaround. It converts a future complaint into a service.
How many suppliers should I keep?
Two approved sources for the top three designs, one for the tail. The second source is what keeps pricing honest.
Send the Trendy Earrings materials. We return a four-line care card plus the replating wording for your packaging. See the full range at Trendy Earrings and HOLYCOME.
The short version: specify the number, seal the sample, inspect against both. Everything else is negotiation.