The Sample Approval That Survives Production
Last February, a US buyer of fashion Jewelry Sets placed 200 fashion Jewelry Sets against a sample signed in June. The first container landed with 9 pieces that failed on metal lot mismatch alone, and USD 40-150 landed on the buyer's P&L before a single unit sold, and at USD 78-504 for 200 pieces that is the number the buyer signs.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and metal lot mismatch is what a photograph fails to define, the figure being USD 78-504 for a 200-piece run.
The fix cost about 28 seconds per fashion Jewelry Set and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, shipped as private-label carton with hangtag and certified GRA report, certified GRA report and packed private-label carton with hangtag at 200 pieces.
What US buyers Check Before They Sign
Four lines decide whether fashion Jewelry Sets at USD 78-504 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Put these four into the purchase order and the Private Label Carton argument after delivery becomes arithmetic, on a 200-piece Private Label Carton order at USD 78-504.
Private Label Packaging for fashion Jewelry Sets
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, priced at USD 78-504 for the 200-piece Private Label Carton run.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin fashion Jewelry Set. Below 0.8 mm of shank width we recommend the hangtag only, with GRA report and private-label carton with hangtag stated on the same sheet.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, which is how the Private Label Carton account reads it at USD 78-504.
Where USD 78-504 Per Piece Actually Goes
Cost per piece at USD 78-504 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for fashion Jewelry Sets | 30% | Alloy choice and casting yield |
| Stone or melee for fashion Jewelry Sets | 20% | Sieve range and lot batching |
| Setting and finishing labor for fashion Jewelry Sets | 19% | Jig design and bench minutes |
| Plating, polish and QC for fashion Jewelry Sets | 12% | Per-tray versus per-piece checks |
| Packaging for fashion Jewelry Sets | 19% | private-label carton with hangtag |
A factory with no bench minutes per piece has never costed fashion Jewelry Sets at USD 78-504. Ask for minutes and for the reject rule.
The Three Failures We See Most in Incoming Samples
box fit
A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, which is how the Private Label Carton account reads it at USD 78-504.
Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, which is USD 78-504 on the Private Label Carton schedule.
metal lot mismatch
A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, priced at USD 78-504 for the 200-piece Private Label Carton run.
In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, which is USD 78-504 on the Private Label Carton schedule.
stone count variance
A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, and at USD 78-504 for 200 pieces that is the number the buyer signs.
The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as private-label carton with hangtag and certified GRA report.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 78-504 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, priced at USD 78-504 for the 200-piece Private Label Carton run.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, on a 200-piece Private Label Carton order at USD 78-504.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 78-504 per piece in private-label carton with hangtag.
The Reject Tray Policy That Decides a Partnership
For fashion Jewelry Sets at this price band, the honest answer is a range rather than a point, and the range has a reason, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
The commercial version of this question for fashion Jewelry Sets is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, with GRA report and private-label carton with hangtag stated on the same sheet.
That clause matters more than a discount on fashion Jewelry Sets. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, and at USD 78-504 for 200 pieces that is the number the buyer signs.
What the Quote Actually Covers
Most quotes for fashion Jewelry Sets describe the product and skip the part that decides whether the buyer makes money, with GRA report and private-label carton with hangtag stated on the same sheet.
We run this check per tray rather than per carton because the defect that matters on fashion Jewelry Sets is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, with GRA report and private-label carton with hangtag stated on the same sheet.
The report the buyer receives states the count per tray, the measured average and the outlier count for fashion Jewelry Sets. It is deliberately unglamorous, and it is the document that settles most disputes before they start, quoted at USD 78-504 per piece in private-label carton with hangtag.
How a Repeat Order Gets Built
The sequence below is fixed for a Private Label Carton run. The dates move with the stone lot, not with the shipping season, with GRA report and private-label carton with hangtag stated on the same sheet.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Private Label Carton shipment, on a 200-piece Private Label Carton order at USD 78-504.
What This Means for a First Order
A first Private Label Carton order of 50 pieces per design at USD 78-504 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, certified GRA report and packed private-label carton with hangtag at 200 pieces, on a 200-piece Private Label Carton order at USD 78-504.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, which is how the Private Label Carton account reads it at USD 78-504.
Check the count, the weight and cross-piece color match and stone count per piece before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
Frequently Asked Questions
What is the minimum order for fashion Jewelry Sets?
50 pieces per fashion Jewelry Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and at USD 78-504 for 200 pieces that is the number the buyer signs.
Do you supply certificates for fashion Jewelry Sets?
GRA report on fashion Jewelry Sets above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of cross-piece color match, which is what a counter or a listing actually needs, on a 200-piece Private Label Carton order at USD 78-504.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if metal lot mismatch shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, certified GRA report and packed private-label carton with hangtag at 200 pieces.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, the figure being USD 78-504 for a 200-piece run.
What is the minimum order for fashion Jewelry Sets?
50 pieces per fashion Jewelry Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and at USD 78-504 for 200 pieces that is the number the buyer signs.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Private Label Carton, shipped as private-label carton with hangtag and certified GRA report.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and at USD 78-504 for 200 pieces that is the number the buyer signs.
Related reading: Fashion Jewelry Sets Vermeil Upgrade: How the Second Order Becomes Cheaper - HOLYCOME Men's Silver Jewelry Valentine Program: Alloy, Karat and the Cost of a Color Change - HOLYCOME
