The Sample Approval That Survives Production in the Private Label Carton Program
A US buyer of charm Bracelets came to us after 200 charm Bracelets from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: clasp torsion failure had drifted far enough that the buyer's own bench could not correct it without recutting, certified GRA report and packed private-label carton with hangtag at 200 pieces.
That rejection was avoidable at the drawing stage. Clasp torsion failure belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, the figure being USD 40-264 for a 200-piece run.
We kept the Private Label Carton price and changed the four measurements that matter. The rebuild cost about 20 seconds per piece and removed the whole claim conversation, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.
Four Spec Lines a Private Label Carton Buyer Checks
The Private Label Carton buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, the figure being USD 40-264 for a 200-piece run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
None of the four adds cost at USD 40-264. They add about 20 seconds per piece and remove the reason to inspect twice.
Private Label Packaging for charm Bracelets
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, priced at USD 40-264 for the 200-piece Private Label Carton run.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin charm Bracelet. Below 0.8 mm of shank width we recommend the hangtag only, with GRA report and private-label carton with hangtag stated on the same sheet.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, which is how the Private Label Carton account reads it at USD 40-264.
Cost Split on a Private Label Carton Piece at USD 40-264
At USD 40-264 per piece for charm Bracelets, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for charm Bracelets | 32% | Alloy choice and casting yield |
| Stone or melee for charm Bracelets | 23% | Sieve range and lot batching |
| Setting and finishing labor for charm Bracelets | 21% | Jig design and bench minutes |
| Plating, polish and QC for charm Bracelets | 14% | Per-tray versus per-piece checks |
| Packaging for charm Bracelets | 10% | private-label carton with hangtag |
The saving in the cheapest quote hides in plating and stone grade. At 200 pieces that saving is visible in season two, and at USD 40-264 for 200 pieces that is the number the buyer signs.
Three Failures That Reach the Private Label Carton Bench
length drift on bangles
A bangle that measures 6.9 inch instead of 7.0 slides differently on the wrist. Oval versus round form changes the fit even at the same number, certified GRA report and packed private-label carton with hangtag at 200 pieces.
In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring clasp torsion resistance at the tray level, not inspecting the finished carton, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.
clasp torsion failure
A box clasp rated for a necklace fails under wrist rotation. The clasp has to be tested in torsion, not only in pull, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.
The commercial effect is clasp replacement plus reship, typically USD 9-15 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.
link gap growth
Gaps between links grow when the connecting pin is 0.05 mm under size. A pin gauge on every tenth piece catches it cheaply, on a 200-piece Private Label Carton order at USD 40-264.
Our countermeasure is a gauge and a written limit. It adds about 20 seconds per piece and removes the defect from the run rather than from the carton, with GRA report and private-label carton with hangtag stated on the same sheet.
Terms Behind a Private Label Carton Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as private-label carton with hangtag and certified GRA report.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 40-264 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, priced at USD 40-264 for the 200-piece Private Label Carton run.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of clasp torsion resistance for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 40-264 per piece in private-label carton with hangtag.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 40-264 per piece in private-label carton with hangtag.
The Reject Tray Policy That Decides a Partnership
On charm Bracelets, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, with GRA report and private-label carton with hangtag stated on the same sheet.
The commercial version of this question for charm Bracelets is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, shipped as private-label carton with hangtag and certified GRA report.
That clause matters more than a discount on charm Bracelets. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, priced at USD 40-264 for the 200-piece Private Label Carton run.
What the Quote Actually Covers
Buyers in US wholesale tend to over-index on unit price for charm Bracelets and under-index on what happens after delivery, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.
We run this check per tray rather than per carton because the defect that matters on charm Bracelets is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.
The report the buyer receives states the count per tray, the measured average and the outlier count for charm Bracelets. It is deliberately unglamorous, and it is the document that settles most disputes before they start, quoted at USD 40-264 per piece in private-label carton with hangtag.
The Calendar Behind a Private Label Carton Run
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on charm Bracelets at USD 40-264.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, and the Private Label Carton quote for it sits at USD 40-264.
The First Private Label Carton Order
Start with three designs at 50 pieces each. That covers the 200 pieces you need to read sell-through without betting on one model, and the Private Label Carton quote for it sits at USD 40-264.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 200 pieces inside that window. The calendar is the same on every Private Label Carton run, priced at USD 40-264 for the 200-piece Private Label Carton run.
Getting private-label carton with hangtag to US wholesale
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US wholesale, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 40-264.
FOB is the default and DDP is the option. Buyers new to US wholesale usually take DDP once and then switch after they see the breakdown, which is how the Private Label Carton account reads it at USD 40-264.
At receiving, count cartons, weigh one tray and measure ten pieces against clasp torsion resistance. Twenty minutes here saves a season of returns, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.
Frequently Asked Questions
What is the minimum order for charm Bracelets?
50 pieces per charm Bracelet. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 40-264 for the 200-piece Private Label Carton run.
Do you supply certificates for charm Bracelets?
GRA report on charm Bracelets above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of clasp torsion resistance, which is what a counter or a listing actually needs, priced at USD 40-264 for the 200-piece Private Label Carton run.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if clasp torsion failure shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which the Private Label Carton file records at USD 40-264 in private-label carton with hangtag.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, the figure being USD 40-264 for a 200-piece run.
What is the minimum order for charm Bracelets?
50 pieces per charm Bracelet. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 40-264 for the 200-piece Private Label Carton run.
Next Step
If the USD 40-264 band fits the shelf, send a drawing and we quote the 200-piece Private Label Carton run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across charm Bracelets and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, priced at USD 40-264 for the 200-piece Private Label Carton run.
Related reading: Charm Bracelets Vermeil Upgrade: How the Second Order Becomes Cheaper - HOLYCOME Fashion Jewelry Sets Valentine Program: Alloy, Karat and the Cost of a Color Change - HOLYCOME
